Procedures for putting on and taking off protective clothing include three points: the preparation before wearing protective clothing, the method of wearing protective clothing and the method of taking off protective clothing; Incorrect order of putting on and taking off protective clothing may cause germs to cause injury to workers.

Method of putting on and taking off protective clothing
 

First, prepare before wearing protective clothing
 

Before wearing protective clothing, you must do sufficient inspection work, and you can not rely on personal experience alone, otherwise it may cause serious safety accidents.

1. The protective grade and performance of protective clothing are consistent with the performance required in the use occasion.

2. Confirm the size of protective clothing. Before wearing, make sure that the size of the protective clothing is suitable for your size. If it is too large or too small, it will cause inconvenience or accidental damage or tear during work.

3. Check the overall integrity of protective clothing. Such as whether the surface of the protective clothing is contaminated or cracked at the suture. Remove sharp objects and remove unnecessary keys and pendants from sharp objects to avoid damage to protective clothing during work.

Second, the order of wearing protective clothing

 

The wearing of protective clothing must follow a certain order, so as to ensure that the protective clothing is worn correctly and quickly, play the role of protective clothing in work, and lay the foundation for safely taking off after use.

1. Unfold the protective overalls (the hood is facing you, the opening is upward);

2. Open the neck, chest, and legs of the protective clothing to stretch into the trousers, wear a jacket, and fasten the belt. ;

3. After putting on the mask, check the tightness of the mask as soon as possible, and then fasten the protective clothing neck buckle after confirming that it is correct;

4. Put on protective gloves, put down the outer sleeve and fasten it.

Finally, in order to improve the tightness of the entire protective clothing, tape can be added to the openings (such as placket, cuffs, trousers, masks and hooded interfaces of protective clothing. To enhance hand protection, you can choose to wear two layers of gloves, etc.). During the entire process, the inner layer of the protective clothing should be prevented from contacting the external environment as much as possible to prevent the protective clothing from being contaminated from the beginning.

 

Third, take off protective clothing

The principle that should be followed when taking off protective clothing is to take off the protective clothing safely without causing pollution to the human body and the environment. Special note here is that the necessary disinfection and decontamination must be carried out before taking off the protective clothing. The disinfection and decontamination of protective clothing is mainly to ensure that workers can take off the protective clothing safely without being injured by harmful bacteria on the surface of the protective clothing or causing environmental pollution. After disinfection and decontamination, you must also follow certain procedures when removing protective clothing:

 

1. Take off the hood, pull the chest to the shoulders, when taking off the gloves, retract your hands into the cuffs and grab the inner sleeves, take off the gloves and tops behind your hands;

2. Put your hands into the waistband and turn them out, take off your pants

3. Take off the medical mask and goggles.